-- *****************************************************************
-- CISCO-SNMP-NOTIFICATION-CAPABILITY.my:
-- Cisco SNMP-NOTIFICATION-MIB AGENT-CAPABILITIES
--   
-- July 2004, Rashmi Purandare
--   
-- Copyright (c) 2003-2006, 2008 by Cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************

CISCO-SNMP-NOTIFICATION-CAPABILITY DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY
        FROM SNMPv2-SMI
    AGENT-CAPABILITIES
        FROM SNMPv2-CONF
    ciscoAgentCapability
        FROM CISCO-SMI;


ciscoSnmpNotificationCapability MODULE-IDENTITY
    LAST-UPDATED    "200806250000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service

            Postal: 170 West Tasman Drive
            San Jose, CA  95134
            USA

            Tel: +1 800 553-NETS

            E-mail: cs-lan-switch-snmp@cisco.com, cs-snmp@cisco.com"
    DESCRIPTION
        "The capabilities description of SNMP-NOTIFICATION-MIB."
    REVISION        "200806250000Z"
    DESCRIPTION
        "Added capability statement
        cSnmpNotifCapc4710aceVA1R700 for ACE 4710 
        Application Control Engine Appliance."
    REVISION        "200603290000Z"
    DESCRIPTION
        "Added capability statement cSnmpNotifCapACSWV03R000
        for Application Control Engine (ACE)."
    REVISION        "200407280000Z"
    DESCRIPTION
        "Added capability for VISM Release 3.3."
    REVISION        "200308280000Z"
    DESCRIPTION
        "Initial version of this MIB module."
    ::= { ciscoAgentCapability 330 }



cSnmpNotifCapCatOSV05R0501 AGENT-CAPABILITIES
    PRODUCT-RELEASE "Cisco CatOS 5.5(1)."
    STATUS          current
    DESCRIPTION
        "SNMP-NOTIFICATION-MIB capabilities."

    SUPPORTS        SNMP-NOTIFICATION-MIB
    INCLUDES        {
                        snmpNotifyGroup,
                        snmpNotifyFilterGroup
                    }
    VARIATION       snmpNotifyTag
    SYNTAX          OCTET STRING (SIZE (0..32))
    DESCRIPTION
        "Maximum tag size supported is 32 characters."

    VARIATION       snmpNotifyStorageType
    SYNTAX          INTEGER  {
                        volatile(2),
                        nonVolatile(3),
                        readOnly(5)
                    }
    DESCRIPTION
        "Only support volatile(2), nonVolatile(3) and
        readOnly(5)."

    VARIATION       snmpNotifyFilterProfileStorType
    SYNTAX          INTEGER  {
                        volatile(2)
                    }
    DESCRIPTION
        "Only support volatile(2)."

    VARIATION       snmpNotifyFilterStorageType
    SYNTAX          INTEGER  {
                        volatile(2)
                    }
    DESCRIPTION
        "Only support volatile(2)."

    ::= { ciscoSnmpNotificationCapability 1 }

cSnmpNotifCapVISM33 AGENT-CAPABILITIES
    PRODUCT-RELEASE "Cisco VISM Release 3.3."
    STATUS          current
    DESCRIPTION
        "SNMP-NOTIFICATION-MIB capabilities."

    SUPPORTS        SNMP-NOTIFICATION-MIB
    INCLUDES        { snmpNotifyFilterGroup }
    VARIATION       snmpNotifyFilterProfileName
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported."

    VARIATION       snmpNotifyFilterProfileStorType
    SYNTAX          INTEGER  {
                        nonVolatile(3)
                    }
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported.
        All rows will have
        snmpNotifyFilterProfileStorType of
        nonVolatile (3) since it is stored on
        the processor card hard disk."

    VARIATION       snmpNotifyFilterProfileRowStatus
    SYNTAX          INTEGER  {
                        active(1),
                        notReady(3)
                    }
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported.
        The rowStatus will be active if the
        snmpNotifyFilterProfileName has
        corresponding active entries in
        snmpNotifyFilterTable. It will be
        notReady (3) if the
        snmpNotifyFilterProfileName has no
        corresponding active entries in the
        snmpNotifyFilterTable."

    VARIATION       snmpNotifyFilterMask
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported."

    VARIATION       snmpNotifyFilterType
    SYNTAX          INTEGER  {
                        included(1)
                    }
    ACCESS          read-only
    DESCRIPTION
        "Read only access.
        Only included (1) is supported."

    VARIATION       snmpNotifyFilterStorageType
    SYNTAX          INTEGER  {
                        nonVolatile(3)
                    }
    ACCESS          read-only
    DESCRIPTION
        "Read only access and nonVolatile(3)
        is supported."

    VARIATION       snmpNotifyFilterRowStatus
    SYNTAX          INTEGER  {
                        active(1),
                        createAndGo(4),
                        destroy(6)
                    }
    DESCRIPTION
        "Only active(1), createAndGo(4), destroy(6)
        are supported."

    ::= { ciscoSnmpNotificationCapability 2 }

cSnmpNotifCapACSWV03R000 AGENT-CAPABILITIES
    PRODUCT-RELEASE "ACSW (Application Control Software) 3.0"
    STATUS          current
    DESCRIPTION
        "SNMP-NOTIFICATION-MIB capabilities."

    SUPPORTS        SNMP-NOTIFICATION-MIB
    INCLUDES        {
                        snmpNotifyGroup,
                        snmpNotifyFilterGroup
                    }
    VARIATION       snmpNotifyTag
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported."

    VARIATION       snmpNotifyType
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported."

    VARIATION       snmpNotifyStorageType
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported."

    VARIATION       snmpNotifyRowStatus
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported."

    VARIATION       snmpNotifyFilterProfileName
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported."

    VARIATION       snmpNotifyFilterProfileStorType
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported."

    VARIATION       snmpNotifyFilterProfileRowStatus
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported."

    VARIATION       snmpNotifyFilterMask
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported."

    VARIATION       snmpNotifyFilterType
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported."

    VARIATION       snmpNotifyFilterStorageType
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported."

    VARIATION       snmpNotifyFilterRowStatus
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported."

    ::= { ciscoSnmpNotificationCapability 3 }

cSnmpNotifCapc4710aceVA1R700 AGENT-CAPABILITIES
    PRODUCT-RELEASE "ACSW (Application Control Software) A1(7)
                         for ACE 4710 Application Control Engine 
                         Appliance."
    STATUS          current
    DESCRIPTION
        "SNMP-NOTIFICATION-MIB capabilities."

    SUPPORTS        SNMP-NOTIFICATION-MIB
    INCLUDES        {
                        snmpNotifyGroup,
                        snmpNotifyFilterGroup
                    }
    VARIATION       snmpNotifyTag
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported."

    VARIATION       snmpNotifyType
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported."

    VARIATION       snmpNotifyStorageType
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported."

    VARIATION       snmpNotifyRowStatus
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported."

    VARIATION       snmpNotifyFilterProfileName
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported."

    VARIATION       snmpNotifyFilterProfileStorType
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported."

    VARIATION       snmpNotifyFilterProfileRowStatus
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported."

    VARIATION       snmpNotifyFilterMask
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported."

    VARIATION       snmpNotifyFilterType
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported."

    VARIATION       snmpNotifyFilterStorageType
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported."

    VARIATION       snmpNotifyFilterRowStatus
    ACCESS          read-only
    DESCRIPTION
        "Read only access is supported."

    ::= { ciscoSnmpNotificationCapability 4 }

END